Image unavailable
Massey Ferguson MF 1529
GENERAL INFORMATION
- Manufacturer
- AGCO
- Make
- Massey Ferguson
- Class
- > 40 hp
ENGINE & PERFORMANCE
ISP HORSEPOWER (GROSS POWER)
- Hp
- 28
- Rated Engine rpm
- 2600
PTO HORSEPOWER
- Hp
- 23.2
- Rated Engine rpm
- 2600
ENGINE
- Make
- ISEKI
- Model
- E3CD-VB60
- Engine Emission Level
- Tier IV Interim
- # of Cylinders
- 3
- Valves per Cylinder
- 2
- Bore (in)
- 3.43
- Stroke (in)
- 3.3
- Total Displacement (CID)
- 91.4
- Cylinder Liners
- Cast Iron
- Aspiration/Charge Cooling
- Natural
- Starting Aid
- Glow Plug
COOLING SYSTEM
- Type of Pump
- Pressurized Liquid
- Fan Type
- Crankshaft thru V-belt
AIR INTAKE SYSTEM
- Intake Location (aspiration location)
- Under hood
- Air Intake Location (hot or cold side)
- Under hood
- Air Cleaner Type
- Dry-pleated paper
EXHAUST SYSTEM
- Type
- Horizontal
- Muffler Location
- Under hood
FUEL INJECTION SYSTEM
- Injection Pump Type
- Inline
- Injectors Type & Control: Indirect injected diesel
- Indirect injected diesel
- Governor Type (mechanical or electric)
- Mechanical
- Fuel Filters (#/microns)
- Single with Water Separator
LUBRICATION SYSTEM
- Type of Feed Pump
- Pressure lube
- Number of Filters
- 1 Spin-on
ELECTRICAL SYSTEM
- Starting and Charging Voltage
- 12V
- Alternator (Standard/Optional)
- 40 Amp
TRANSMISSION & DRIVE TRAIN
CLUTCH
- Type
- Dry/Hydraulic
- Number of Discs/Plates
- Single Disc/Wash plate
- Actuation
- Mechanical
STANDARD TRANSMISSION
- Type
- Mechanical
- Manufacturers Description
- SynchroShuttle
- Number of Forward/Reverse Gears
- 8F/8R (2 non-synchronized ranges)
- Maximum Speed Forward @ rpm/Reverse (mph)
- 16.7/15.46
- Full Shuttle Reverser (yes/no)
- No
- Tires Used for Calculation
- 14.9-24
OPTIONAL TRANSMISSION 1
- Type
- Hydrostatic
- Manufacturers Description
- Hydrostatic 3 ranges
- Number of Forward/Reverse Gears
- Infinite
- Number of Forward/Reverse Gears with Creeper
- Infinite
- Maximum Speed Forward @ rpm/Reverse (mph)
- 14.56-11.03
- Full Shuttle Reverser (yes/no)
- Yes
OPTIONAL TRANSMISSION 2
- Type
- Hydrostatic
- Manufacturers Description
- Hydrostatic 3 ranges
- Number of Forward/Reverse Gears
- Infinite
- Maximum Speed Forward @ rpm/Reverse (mph)
- 14.56-11.03
- Full Shuttle Reverser (yes/no)
- Yes, foot pedal
POWER TAKE-OFF
- PTO Type
- Live (9/3)/Independent (hydrostatic)
- Type of Clutch
- Dry single disc/Wet, multi-disc
PTO SPEED @ ENGINE RPM
- 540 rpm (6 spline shaft)
- Standard
- 1000 rpm (21 spline shaft)
- Standard
STEERING HYDRAULIC SYSTEM
- Steering Type (power or manual)
- Hydrostatic
- Steering Pump Type
- Gear
REAR AXLE & FINAL DRIVE
- Rear Axle Type
- Flanged
- Differential Lock Type
- Ring gear and pinion-mechanical
- Final Drive Type
- Outboard spur gear
4WD FRONT AXLE
- Axle Type
- Bevel Gear
- Differential Lock Type
- Limited Slip
- Engagement
- Mechanical Lever
- Open Axle Shaft Joints
- No
- Maximum Steering Angle (degrees)
- 55
BRAKES
- Service Brakes Type
- Wet Disc
- Parking Brake Type
- Foot pedal with hand lever lock
HYDRAULICS (STANDARD)
- System Type
- Open Center
- Total Pump Flow (gpm)
- 10
- Rated Flow @ One SCV (gpm)
- 8.1
- Maximum Output @ SCV Couplers (gpm)
- 7.4
- Operating Pressure (psi)
- 2134
- Remote Control Valves Available (Standard/Optional)
- 2 mid/2 rear
THREE POINT HITCH
- ASAE Hitch Category
- Category I
- Type of Draft Sensing
- Position Control
- Lift Capacity @ 24” (lb)
- 1610
- Lift Capacity @ ball/hook ends (lb)
- 2425
DRAWBAR
- Drawbar Type
- Fixed
OPERATOR AREA
- Type of Operator Area
- ROPS
- Chassis type
- Semi-flat
- Cab Suspension Type
- ISO Mounted
- Steering Wheel Adjust
- Fixed
- Steering Type
- Power
- Decelerator/Accelerator Pedal (Standard/Optional)
- Foot Throttle
STANDARD SEAT
- Type
- Cushion
- Type of Suspension
- Suspended with Weight Adjustment
INSTRUMENTATION
- Types of Gauges
- Digital and Analog
DIMENSIONS & WEIGHTS
4WD DIMENSIONS
- Wheelbase (in)
- 66.7
- Overall Length with Front Weights (in)
- 120.7
- Minimum Overall Width (in)
- 52.6
- Height Over Cab (in)
- 98.4
- Standard Tire Size - Front
- 7x14
- Standard Tire Size – Rear
- 11.2x24
- Front Wheel Track, 4WD, minimum-maximum (in)
- 40.3
- Rear Wheel Track, 4WD, minimum-maximum (in)
- 39.8
- Turn Radius (ft-in) @ tire size
- 110.2 in
- Approximate Shipping Weight (lb)
- 2557
CAPACITIES
- Fuel Tank
- Standard (g): 8.3